吸沙泵的正確運用辦法是什么？下面小編就給大家引見一下。

吸沙泵壓濾機在開機和試運轉首先要保證泵依照標識所標的方向停止旋轉，檢驗電極接線，避免倒轉，其次保證泵體中加滿液體，千萬不可干磨空轉，以避免損壞機封，形成泄露。各項工作就緒后，開泵運轉，把流量、揚程、電流穩步伐整到需求的高度。這些都是些細節不過假如想讓您的壓濾機泵更好更永世的為您效勞還是多留意一下正確的裝置方式和運用頤養。
吸沙泵過載工作是指電機負載扭矩過大，吸沙泵形成電機電流變大，揚程和流量都是由電機轉速決議，那么功率定下來后，經過進步轉速來進步流量，也會招致揚程增加，不契合能量守恒，所以進步流量只能靠增加扇葉大小，然后吸沙泵的電機軸負載扭矩變大，電機轉速降落，揚程降落，流量也呈降落趨向但綜合扇葉變大要素，應該還是會進步。
以上就是小編為大家引見的吸沙泵的正確運用辦法，希望大家可以有所理解。

What is the correct way to use the sand pump? Here is a small editor to introduce you.
In the start-up and trial operation of sand suction pump filter press, it is necessary to ensure that the pump stops rotating according to the direction marked, check the electrode connection, avoid reverse rotation, and then fill the pump body with liquid. Do not dry grind idling to avoid damaging the seal and forming leakage. After all work is ready, start the pump and run it, and steadily cut the flow, lift and current to the required height. These are some details, but if you want to make your filter press pump better and more lasting for you, or pay more attention to the correct device and use of food.
Overload of sand suction pump refers to the motor load torque is too large, the motor current becomes larger due to the sand suction pump. The head and flow are determined by the motor speed. After the power is set, the flow rate will be improved by improving the speed, and the lift will increase, which is not consistent with the energy conservation. Therefore, the progressive flow can only be increased by increasing the fan blade size, and then the load torque of the motor shaft of the sand suction pump will be increased, Motor speed falls, lift falls, flow also tends to fall, but the factors of the integrated fan blade increase, should still progress.
Above is the small compilation for everyone to introduce the sand pump correct use method, hope you can understand.